At the recent Le Mans 24 hour Endurance Race, VentureShield™ was called upon to protect almost 40% of the field of 50. Pictured above was the damage sustained after the initial pre qualifying session which was only two hours long! This session took it's toll on the vulnerable painted bumpers of BAM Motorsports Porsche 966GT3 RSR.
Needless to say before the main race VentureShield™ was applied to cover the full front bumper, especially after the evidence above shows how with just a 25mm strip of VentureShield™ was applied to cover their vinyl logo this has managed to withstand the bombardment of rocks that have virtually obliterated the surrounding paintwork and decals.
(click on image to enlarge)
An optically clear, removable, anti-corrosion
adhesive with mold inhibitor built in
VentureShield™ has been tested and approved around the world with leading OEM’s such as Mercedes, Chrysler, Ford, GM, Ferrari, and Nissan.
Greater UV resistance and color stability - won't yellow with age
*During Nissan & Mercedes testing, the leading competitors’ film was punctured with a 9lb probe; VentureShield™ was not punctured until 20lb of pressure was applied. Therefore, the film is over 100% more abrasive resistant, meaning no paint damage
Greater long term durability – the urethane’s
physical properties don't degrade with wear
Substrate Thickness
6.0 mils (0.006”) /0.1524mm (170µ)
Adhesive
thickness:
2.0mils (0.002”) /0.0787mm (50gsm)
Peel adhesion:
25oz / inch width / 16.3 N / 25mm
Release liner:
Polycoated Bleached Kraft 90lb per ream / 148 gsm
Chemical resistance:
Excellent
UV resistance:
100% up to 10 years
Shear adhesion (PSTC-1)
Indefinite @ 2.2 psi / 15.2 kPa
Tensile (PSTC-7):
56lb / inch width / 253 N (31kg) / 25mm
Elongation at break:
370%
Puncture resistance (ASTMD-1000):
18kg
Max Temp (continuous use):
212°F / 100°C
Min application temp:
-10°F / -23°C
Easy to apply film cut to match the contours of
your bike perfectly, all
you need for application
is water and an afternoon!
Full instructions are supplied.
The patented acrylic adhesive will withstand lubricants, oils, UV rays, and unlike the competition, also contains
an anti-corrosion polymer which inhibits rust and mold growth. Our new formulation now allows you to handle the film aggressively without leaving finger prints or
stretch marks in the adhesive – even on black vehicles!
Don't need a full kit? You can buy just the pieces you need. Headlamp cover
from
only £19.75
Looking for extra pieces of film? You can buy a sheet of film to cover panniers...car roofs...belly pans...machinery... the possibilities are endless, the protection is priceless!
Easy to apply film cut to match the contours of
your bike perfectly, all
you need for application
is water and an afternoon!
